NanoWater can deliver a container systems in insulated (20 or 40 ft) containers. Containerization includes all piping and fittings connected, all cables and wires connected to instrument and control cabinet. This is a “plug and play” unit supply.
The container will be mounted with one side door, one inlet/outlet (terminal point), one roof hatch, one side door and floor drainage. A sun roof can be offered on request to limit the inside temperature in the container if extreme conditions have to be considered.
The container can be air cooled on request. The split-unit and the outdoor part will be placed next to the container. Biotech can also provide solar unit to provide energy for the plant control system and for the lighting system and for the remote WIFI control system if required.
The design of the water treatment plants is always custom made and is subject to modifications depending on the water quality.
Reverse Osmosis units often required pre-treatment for the following parameters:
- Suspended solids
- TOC, COD/BOD, hydrocarbons
- Iron and manganese
- Hardness
NanoWater provides all kinds of pre-treatment required before your RO, according to your water analysis and process requirements.
STANDARD FEATURES
- Duplex SS-high pressure pipe lines
- PVC sch 80- LOW pressure pipe lines
- Powder coated frames.
- Pressure exchanger or Turbo charger as energy recovery device
- Thin film composite membranes
- FRP pressure vessels pump
● PLC driven control panel & VDF - PDP energy efficient pump
- Product TDS meter
- Low- & High-pressure protection
- Permeate & concentrate flowmeters
- Low membrane flux < 10 GFD
- Remote Control Monitoring
- Automatic product water flush on shutdown
Why containerization?
Containerized plants have many advantages over built-in plant room installations:
- Plug and play unit
- Quick installation
- Limited civil work (only container foundation)
- Small foot print
- Easy transportation
- Mobile: useful for construction sites
- Turnkey delivery: piping, cables, air conditioning
Containerization of a water treatment plant does not only include the supply of a container, it includes the complete installation of the plant:
- Connected piping between equipment pumps, vessels, skids, tanks
- Cabling and wiring of pumps and instrumentation inside the container to main control cabinet.
Plant Size / Standard container
Depending on the plant size, containerized plant in 20 or 40 ft container(s) are available.
ADDITIONAL FEATURES
- EDI Electrode-ionization
- Ultrafiltration
- Automatic blending
- ORP
- Ozone Injection
- Tube setting system
- UV sterilization
- Chlorination
- Dechlorination
- PH adjusts
- MM filters (sand, anthracite, activate carbon)
- Ion exchanger
- Turbidity monitor
- Chemical Injection System
- Suction and discharge pulsation damper
We modify our containers to create conducive environment within for our clients’ operators. The internal walls and ceilings are layered with Superflex boards, the floors are checker-plated and epoxy coated. The containers come with air-conditioners, overhead lighting, safety shower devices, one-man side doors for easy personnel access, and pre-built utility tie-in points for hassle-free connections at sites. All these without compromising any compliance to seaworthiness and international shipping standards and regulations.
Our standard and modular BWRO systems are pre-designed. We keep stock of regularly used materials and parts and components. With the in-house production teams and facilities, we are able to control our production schedules and manage delivery lead time of an order, better than others. Our systems are designed and made to be accommodated by either 20’ or 40’ containers. This makes shipment and transportation easy, and inexpensive too. They are configured for hassle-free piping and cabling connections at project sites. With vigorous and stringent factory acceptance tests and certifications, they can be optimized within a short time for operations after testing and commissioning at the sites