Bio-Mob™ Water containerized wastewater treatment plants offer a fast and effective above ground portable wastewater treatment system solution for any site, without the need for any existing infrastructure. Containerized mobile treatment systems are ready to use immediately on delivery and cater from 60 persons to 20,000 persons capacity.

Application Serving 60 to 20,000 Persons
  • Work camps, “man camps”
  • Mining, oil field, and gas camps
  • Military installations
  • Emergency sanitation, disaster relief
  • Marine facilities
  • Temporary flow increases or flow diversions

A containerized portable sewage treatment plant gives clients the option to relocate it onsite or easily transport it to new sites as necessary. In addition to that, the systems are modular so that they can work together in a variety of combinations effectively dealing with variable wastewater volumes to achieve any effluent quality.

Bio-Mob™ Benefits 
  • Portable: Ship by truck, rail, container, or aircraft
  • Self-contained: Bio-Mob™ is fully-plumbed. Set, plumb, wire, and go
  • Modular: 14’-42’ ft tanks (4.3-12.8 m) are installed singly or in multi-tank arrays
  • Versatile: Install above ground and relocate later, or below ground
  • Easy to set and operate: No advanced operator license required
  • Sustainable and energy-efficient: 1-2 kWh per 1000 treated gal. (3785 L)
  • Reuse-quality effluent: Meets stringent permit limits

NanoWater  design and manufacture our containerized plants to international standards and provide an international delivery service. With a containerized sewage treatment plant there are no restrictions when it comes to the type of wastewater or the target effluent quality.

How do Containerized Bio-Mob™ Technology works?

For small and medium scale commercial wastewater treatment applications, we preinstall all treatment modules (processes) inside a single container. The complete treatment process including primary settlement, secondary treatment and clarification happens within the container. This type of packaged plant is ideal for temporary and mobile sewage treatment. For large scale wastewater treatment applications, the treatment modules will depend on the influent and the effluent requirements and characteristics.

 

 

 

 

Bio-Mob™ technology provides a reliable, energy-efficient alternative for wastewater treatment fully automatic operation and simple maintenance by unskilled staff.

1.Primary treatment/screening 

Primary treatment involves mechanical pre-treatment (removal) of inorganic coarse materials and solids by means of a sieving screw built into or on top of the container. We install compact units for grease separation and sand removal. Holding tanks collect the removed waste constituents for separate disposal. In smaller systems, primary treatment can be built into the system by use of settling in a pre-treatment tank. The primary sludge goes for sludge treatment.

2. Biological treatment 

happens when microorganisms convert dissolved contaminants into sludge and gases in the wastewater. The biological treatment process can incorporate an MBBR type system. The type of biological treatment depends on the wastewater type and concentration. The biological treatment process and all necessary controls are fully built into the container.

3.Clarification

of the effluent is via the use of lamella separators built into containers providing high flow capacity final clarification prior to discharge.

4.Tertiary treatment

occurs where stringent discharge limits exist and require the integration of tertiary treatment modules into the treatment process such as chemical dosing, phosphorous reduction and disinfection. For each form of tertiary treatment, there are multiple options, for example: chlorination, ozonation or UV irradiation for disinfection.

SYSTEM PERFORMANCE
TREATED WATER QUALITY :

Provided that the equipment is operated as per the instructions issued by Biotech the average water quality will not exceed the following limits:

 

Description

 

Units

 

Design Value

PH

–

6.5 – 8.5

BOD

mg / l

<20

COD

mg / l

<30

TSS

mg / l

<20

Free Chlorine

mg/l

<0.5

Container WWTP standard sizes

Container

PE

Container modules

Footprint

Bio-Mob120

120

1 x 40′

12,20 x 2,45 m

Bio-Mob250

250

1 x 40′

1 x 10′

16,20 x 2,45 m

Bio-Mob500

500

2 x 40′

1 x 10′

16,20 x 5,90 m

Bio-Mob750

750

3 x 40′

12,20 x 9,35 m

Bio-Mob1000

1000

3 x 40′

1 x 20′

12,20 x 12,80 m

Bio-Mob2000

2000

6 x 40′

1 x 20′

46,00 x 5,90 m

Bio-Mob3000

3000

9 x 40′

1 x 20′

46,00 x 9,35 m

Bio-Mob4000

4000

13 x 40′

38,00 x 16,25 m

NanoWater is one of the leading manufactures of fully biological wastewater treatment plants. Our business activities include the dimensioning and delivering of pre-assembles small and medium scale WWTP, compact WWTP and WTTP in containers.
We’re committed to providing quality equipment, timely solutions, and trouble-free operations for your mobile and temporary equipment needs. Our mobile units meet the strict Occupational Safety and Health Administration (OSHA) safety requirements we place as a top priority within our company.